Separating front wheelhouse paneling section

AR63.30-D-0001-01F

Separating front wheelhouse paneling section

MODEL

909

1

Mark separation line (2) at a distance of a = 35 mm, measured from center of hole (3) and in center of bead (arrow B) on door frame paneling (4).

2

Mark separation line (5) at a distance of b = 120 mm, measured from edge (arrow C) on door frame paneling (4).

3

Expose spot welds (arrows A) and cut out with  spot weld milling cutter.

4

Separate door frame paneling (4) along marked separation lines (2, 5).

 Cutting depth should be max. 1 mm in area of spot welds.
Otherwise the components below can be damaged.

5

Expose spot welds (arrows) and cut out with  spot weld milling cutter.

6

Expose spot welds (arrows) and cut out with  spot weld milling cutter.

7

Remove front wheel paneling section (1).