ar6320s110903e

Partially weld in inner A-pillar reinforcement

Typ ar · temat 63.20 · wersja 0101 · 2016-06-03

Dotyczy: Model 447, 448

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 63 Ściana boczna › 63.20 Słupki — Seria 447 · Seria 448

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.34 Ściana boczna › 35.34.45 Słupek — Seria 447 · Seria 448

AR63.20-S-1109-03E

Partially weld in inner A-pillar reinforcement

Model

447, 448

Partially weld in inner A-pillar reinforcement

210 589 17 23 00

Side portal frame

Partially weld in inner A-pillar reinforcement

1

Install inner A-pillar reinforcement (2), fit and fix in place with side portal frame and welding device.



2

Drill rivet holes on inner A-pillar reinforcement (2) with Ø 6.5 mm (area A).



3

Remove inner A-pillar reinforcement (2) and welding device.



4

Deburr rivet holes on both sides.



5

Coat insides of riveted joints and rivet holes with zinc dust paint.


S63.20-4738-06

Partially weld in inner A-pillar reinforcement

S63.20-4739-09

6

Install A-pillar reinforcement (2), fit and fix in place with welding device.

7

Bend over sheet metal lug on inner A-pillar reinforcement (2) (area B).

8

Inner A-pillar reinforcement (2) (areas B to E).

9

Inner A-pillar reinforcement (2) (areas F and G).

10

Rivet inner A-pillar reinforcement (2) with Polygrip Ø 6,4x14 countersunk head rivet (area H).

11

Grind inert gas welds down flat.

12

Clean weld joints.

13

Remove shavings and drill chips.

14

Apply zinc dust paint to weld joints (areas B to E).