Niedostępne w języku „pl”; wyświetlono w języku Angielski.
Umiejscowienie
Grupa funkcyjna 3 Nadwozie › 63 Ściana boczna › 63.20 Słupki — Seria 447 · Seria 448
EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.34 Ściana boczna › 35.34.45 Słupek — Seria 447 · Seria 448
AR63.20-S-1108-01E
Partially cut off A-pillar outer section
Model
447, 448
Modification notes
18.05.2016
Method extended
Operation step 1
1
Scribe separating points and cut (areas A to C).
Do not make the cuts too deep. Otherwise the components below can be damaged and weakened.
Mark separating on A-pillar outer section (1) according to degree of damage (area A).
Model 447.8 with code PS2 (AMG line) Model 448.8 with code CN1 (Exterior rocker panel) Ensure sufficient distance to mounting points of mounting rail on longitudinal member panel when determining separation line in area A.
b
Dimension approx.125 mm
c
Dimension approx.30 mm
S63.20-4706-06
2
Expose spot welds on A-pillar outer section (1) and cut out (area D).
S63.20-4707-09
3
Expose spot welds on A-pillar outer section (1) and cut out (areas E, J and J1).
4
Mark separating point and cut (areas K and L).
5
Heat A-pillar outer section (1) in crosshatched area.
