ar6320s110601e

Separate inner A-pillar

Typ ar · temat 63.20 · wersja 0101 · 2016-06-03

Dotyczy: Model 447, 448

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 63 Ściana boczna › 63.20 Słupki — Seria 447 · Seria 448

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.34 Ściana boczna › 35.34.45 Słupek — Seria 447 · Seria 448

AR63.20-S-1106-01E

Separate inner A-pillar

Model

447, 448

Separate inner A-pillar

1

Remove soundproofing (5) from inner A-pillar (3).


S63.20-4805-11

Separate inner A-pillar

S63.20-4806-09

2

Expose spot welds on inner A-pillar (3) and cut out (areas A to F).

Cut out spot weld (arrow) through two panel thicknesses.

Separate inner A-pillar

S63.20-4807-09

3

Heat inner A-pillar (3) in area G.

Area G is bonded.

4

Remove inner A-pillar (3).

5

Sand down mating surfaces to bare metal in crosshatched areas .

Sand down spot weld flanges to bare metal on both sides.

6

Remove shavings and drill chips.

7

Coat insides of spot weld flanges with zinc dust paint.

Separate inner A-pillar

S63.20-4823-09

8

Sand down mating surfaces to bare metal in crosshatched areas .

Sand down spot weld flanges to bare metal on both sides.

9

Remove shavings and drill chips.

10

Coat insides of spot weld flanges with zinc dust paint.

Do not coat bonding surface (area H) with zinc dust paint.
Otherwise there may be adhesion problems.

Observe pretreatment of bonding surface (area H).