Gap dimensions |
Number | Designation | Model 447, 448 except code W65, W68 | Model 447, 448 with code W65, model 447, 448 with code W68 | |||
BE60.00-N-1002-01J | Gap dimensions | Fender to headlamp | Dimension "BA" | mm | 0,3 (0,25) | 0,3 (0,25) |
Fender to bumper | Dimension "BB" | mm | 2 (1) | 2 (1) | ||
Fender to A-pillar | Dimension "BC" | mm | 2,6 (1) | 2,6 (1) | ||
Fender to front door | Dimension "BD" | mm | 4,5 (0,8) | 4,5 (0,8) | ||
Fender to longitudinal member | Dimension "BE" | mm | 4,5 (1,2) | 4,5 (1,2) | ||
For picture, see | ||||||
Gap dimensions |
Number | Designation | Model 447, 448 except code W65, W68 | Model 447, 448 with code W65, model 447, 448 with code W68 | |||
BE60.00-N-1004-01J | Gap dimensions | Front door to longitudinal member | Dimension "DA" | mm | 6 (+2/-1) | 6 (+2/-1) |
Front door to sidewall | Dimension "DB" | mm | 4 (1) | 4 (1) | ||
Front door to sliding door | Dimension "DC" | mm | 4 (+1,2/-0,8) | 4 (+1,2/-0,8) | ||
Front door to A-pillar | Dimension "DD" | mm | 4,5 (+1,5/-1) | 4,5 (+1,5/-1) | ||
Front door to fuel filler door | Dimension "DE" | mm | 4 (1) | 4 (1) | ||
For picture, see | ||||||
129 589 03 21 00
Feeler gauge
S63.20-4668-09
1 | Install top A-pillar outer paneling (1), fit and fix in place. |
2 | Install front door and fender. |
3 | Insert windshield. |
4 | Adjust gap dimensions with feeler gauge and adjust. |
5 | Remove front door, fender and windshield. |
6 | Top A-pillar outer paneling (1) (areas A to C). |
7 | Top A-pillar outer paneling (1) (areas D and E). |
8 | Top A-pillar outer paneling (1) (areas F to H). |
9 | Grind inert gas welds and inert gas spot welds down flat (areas D to H). |
10 | Clean all weld joints. |
11 | Restore surfaces on top A-pillar outer paneling (1) and smooth. |
12 | Remove shavings and drill chips. |