ar6320s110501e

Remove upper A-pillar outer paneling

Typ ar · temat 63.20 · wersja 0101 · 2016-05-24

Dotyczy: Model 447, 448

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 63 Ściana boczna › 63.20 Słupki — Seria 447 · Seria 448

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.34 Ściana boczna › 35.34.45 Słupek — Seria 447 · Seria 448

AR63.20-S-1105-01E

Remove upper A-pillar outer paneling

Model

447, 448

Remove upper A-pillar outer paneling

S63.20-4663-09

a

Dimension approx. 30 mm

b

Dimension approx. 125 mm

c

Dimension approx. 100 mm

1

Mark separating points and cut (areas A to C).

Do not make the cuts too deep.
Otherwise the components below can be damaged and weakened.

Remove upper A-pillar outer paneling

S63.20-4664-09

2

Expose spot welds on top A-pillar outer paneling (1) and cut out (areas D to F).

3

Remove damaged top A-pillar outer paneling (1).

Remove upper A-pillar outer paneling

S63.20-4665-09

4

Sand down mating surfaces to bare metal in crosshatched areas .

Sand down spot weld flanges to bare metal on both sides.

5

Remove shavings and drill chips.

6

Coat insides of spot weld flanges with zinc dust paint.