Prepare A-pillar outer paneling with A-pillar reinforcement for installation · ar6320d112202ts · Mercedes-Benz WIS

AR63.20-D-1122-02TS	Prepare A-pillar outer paneling with A-pillar reinforcement for installation
 Caution	Risk of injury caused by scraping or cutting body parts on sharp vehicle parts	Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. Deburr repair panels.	AS00.00-Z-0017-01A

Model

907, 910

Repair materials

Number	Designation	Order number
BR00.45-Z-1056-07A	1K-zinc dust paint	A 000 986 28 00

 The next steps are shown on the left component part and must be performed in a similar way in the event of damage on the right side of the vehicle.

1	Scribe separation lines on A-pillar outer paneling (1) (areas A and B).

 Take over dimensions (a, b) for separation lines of vehicle.

2	Cut A-pillar outer paneling (1) (areas A and B).

3	Dispose of the leftover piece that has been separated off.

4	Drill holes in A-pillar outer paneling (1) with Ø 8 mm (areas C, D, E and E1).

5	Grind mating surfaces down to bare metal in cross-hatched areas and around holes (areas C, D, E and E1).

 Sand down spot weld flanges to bare metal on both sides.

D63.20-1476-06

6	Drill hole in A-pillar outer paneling (1) with Ø 8 mm (area F).

7	Grind mating surfaces down to bare metal in cross-hatched areas and around hole (area F).

 Sand down spot weld flanges to bare metal on both sides.

8	Remove shavings and drill chips.

9	Zinc dust paint to insides of spot weld flanges.

D63.20-1477-12

10	Grind mating surfaces on A-pillar reinforcement (3) down to bare metal in cross-hatched areas.

 Sand down spot weld flanges to bare metal on both sides.

11	Remove shavings.

12	Zinc dust paint to insides of spot weld flanges.

D63.20-1486-03

as0000z001701a Niebezpieczeństwo obrażeńo elementy pojazdu o ostrych krawędziach.