ar6320d051002ts

Prepare C-pillar inner section for installation

Typ ar · temat 63.20 · wersja 0100 · 2018-08-28

Dotyczy: Model 907.2

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 63 Ściana boczna › 63.20 Słupki — Seria 907 (modele 2**)

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.34 Ściana boczna › 35.34.45 Słupek — Seria 907 (modele 2**)

AR63.20-D-0510-02TS

Prepare C-pillar inner section for installation

Model

907.2

Repair materials

Number

Designation

Order number

BR00.45-Z-1056-07A

1K-zinc dust paint

A 000 986 28 00

Additional information can be found in the superordinate service document.

The safety information in the superordinate service document must be observed.

The next steps are shown on the left component part and must be performed analogously on vehicles with damage on the right side of the vehicle.

Prepare C-pillar inner section for installation

1

Grind mating surfaces on C-pillar inner section (1) down to bare metal in cross-hatched areas.


Sand down spot weld flanges to bare metal on both sides.


Commercially available devices/tools
Rotary wire brush



2

Remove shavings.


Commercially available devices/tools
Wet and dry vacuum cleaner



3

Zinc dust paint to insides of spot weld flanges.


D63.20-1542-03