ar6320d051001ts

Separate C-pillar inner section

Typ ar · temat 63.20 · wersja 0100 · 2018-08-28

Dotyczy: Model 907.2

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 63 Ściana boczna › 63.20 Słupki — Seria 907 (modele 2**)

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.34 Ściana boczna › 35.34.45 Słupek — Seria 907 (modele 2**)

AR63.20-D-0510-01TS

Separate C-pillar inner section

Model

907.2

Repair materials

Number

Designation

Order number

BR00.45-Z-1056-07A

1K-zinc dust paint

A 000 986 28 00

Additional information can be found in the superordinate service document.

The safety information in the superordinate service document must be observed.

The following steps are shown on the left side of the vehicle and must be performed analogously on vehicles with damage on the right side of the vehicle.

Separate C-pillar inner section

1

Expose spot welds on C-pillar inner section (1) (areas A, B, C, D, E, F, and G).


Commercially available devices/tools
Rotary wire brush



2

Cut off spot welds on C-pillar inner section (1) (areas A, B, C, D, E, F, and G).


Commercially available devices/tools
Spot weld milling machine



3

Remove damaged C-pillar inner section (1).


D63.20-1543-06

Separate C-pillar inner section

4

Grind down mating surfaces to bare metal in cross-hatched areas.


Sand down spot weld flanges to bare metal on both sides.


Commercially available devices/tools
Rotary wire brush



5

Remove shavings and milling chips.


Commercially available devices/tools
Wet and dry vacuum cleaner



6

Zinc dust paint to insides of spot weld flanges.


D63.20-1541-03