ar6320d009804ts

Install C-pillar paneling and weld in.

Typ ar · temat 63.20 · wersja 0100 · 2018-10-05

Dotyczy: Model 907.6/7 with code T16 (Sliding door right) Right side of vehicle Model 907.6/7 with code T19 (Sliding door left) Left side of vehicle Model 910.6 with code T16 (Sliding door right) Right side of vehicle Model 910.6 with code T19 (Sliding door left) Left side of vehicle

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 63 Ściana boczna › 63.20 Słupki — Seria 907 (modele 6**, 7**) · Seria 910 (modele 6**)

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.34 Ściana boczna › 35.34.45 Słupek — Seria 907 (modele 6**, 7**) · Seria 910 (modele 6**)

AR63.20-D-0098-04TS

Install C-pillar paneling and weld in.

000 588 01 84 00 Welder

WS60.00-P-0021K

000 588 02 84 00 Welder

WS60.00-P-0022K

Model

907.6/7

with code T16 (Sliding door right)

Right side of vehicle

Model

907.6/7

with code T19 (Sliding door left)

Left side of vehicle

Model

910.6

with code T16 (Sliding door right)

Right side of vehicle

Model

910.6

with code T19 (Sliding door left)

Left side of vehicle

Repair materials

Number

Designation

Order number

BR00.45-Z-1107-01A

Black seam seal 300 ml

A 005 989 63 20

Additional information can be found in the superordinate service document.

The safety information in the superordinate service document must be observed.

The next steps are shown on model 907.633 with code T16 (right sliding door) on the right side of the vehicle and must be carried out in the same way for vehicles with code T19 (left sliding door) on the left side of the vehicle in the event of damage.

Install C-pillar paneling and weld in.

D63.20-A009-09

1

Apply seam sealas shown.

Commercially available devices/tools
Squeeze gun

Model 907.6/7 except code IR2 (Wheelbase 3250 mm), model 910.623/633/643
See Fig. A.

Model 907.6/7 with code IR2 (Wheelbase 3250 mm), model 910.621/631/641
See Fig. B.

Install C-pillar paneling and weld in.

D63.20-A015-09

Shown with code IR2 (Wheelbase 3250 mm)

Install C-pillar paneling and weld in.

Shown except code IR2 (Wheelbase 3250 mm)

D63.20-A010-06

2

Install C-pillar paneling (1), fit, and fix in place.

Commercially available devices/tools
Clamping pliers (Standard)

3

C-pillar paneling (1) (areas B and C).

4.1

Model 907.6/7 with code IR2 (Wheelbase 3250 mm), model 910.621/631/641
C-pillar paneling (1) (areas D1, E and E1).

4.2

Model 907.6/7 except code IR2 (Wheelbase 3250 mm), model 910.623/633/643
C-pillar paneling (1) (areas D, E and E1).

5

Face-grind inert-gas plug welds (area E).

Commercially available devices/tools
Angular grinder

6

Remove shavings.

Commercially available devices/tools
Wet and dry vacuum cleaner

Install C-pillar paneling and weld in.

7

Apply seam sealas shown on C-pillar paneling (1) (area F).


Commercially available devices/tools
Squeeze gun


Shown on model 907.633

D63.20-A011-12

Install C-pillar paneling and weld in.

8

Install, fit and fix in place sliding door entrance (2).


Commercially available devices/tools
Clamping pliers (Standard)



9

Sliding door entrance (2) (areas G and H).



10

Sliding door entrance (2) (area I).



11

Sliding door entrance (2) (area J).


Inert gas weld in intervals and allow to cool down in between.
Reduces heat distortion.



12

Surface-grind inert-gas plug welds (area I) and inert gas weld (area J).


Commercially available devices/tools
Angular grinder


Shown on model 907.633

D63.20-A012-12

13

Remove shavings.

Commercially available devices/tools
Wet and dry vacuum cleaner

14

Restore surfaces and smooth (area J).

Different methods can be used to restore the surfaces.

Powiązane dokumenty