ar6320d000303fa

Welding in right inner B-pillar bottom section

Typ ar · temat 63.20 · wersja 0100 · 2013-11-20

Dotyczy: MODEL 909

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 63 Ściana boczna › 63.20 Słupki — Seria 909

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.34 Ściana boczna › 35.34.45 Słupek — Seria 909

AR63.20-D-0003-03FA

Welding in right inner B-pillar bottom section

MODEL

909

Welding in right inner B-pillar bottom section

1

Install right inner B-pillar bottom section (1), fit and fix in place.


2

Weld right inner B-pillar bottom section (1) to upper inner panel (6) (7).


Complete inert gas welds at intervals holding a steel or copper block from outside, allow to cool down in between.
Otherwise heat distortion can occur.

D63.20-0073-02

Welding in right inner B-pillar bottom section

3

Weld right inner B-pillar bottom section (1) to mounting console (3) and connection part (5) (area F and G).


4

Weld right inner B-pillar bottom section (1) to front inner panel (arrow).

D63.20-0066-03

Welding in right inner B-pillar bottom section

5

Weld right inner B-pillar bottom section (1) to mounting console (3) and inner entrance (4) (area E).

D63.20-0067-12

Welding in right inner B-pillar bottom section

6

Weld right inner B-pillar bottom section (1) to mounting console and inner entrance (area A, B and C).


7

Weld right inner B-pillar bottom section (1) to front inner panel (2) (area D).

D63.20-0068-06