ar6320d000203fa

Welding in right B-pillar paneling bottom section

Typ ar · temat 63.20 · wersja 0100 · 2013-11-22

Dotyczy: MODEL 909

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 63 Ściana boczna › 63.20 Słupki — Seria 909

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.34 Ściana boczna › 35.34.45 Słupek — Seria 909

AR63.20-D-0002-03FA

Welding in right B-pillar paneling bottom section

MODEL

909

Welding in right B-pillar paneling bottom section

1

Install right B-pillar paneling bottom section (1), fit and fix in place.


2

Weld right B-pillar paneling bottom section (1) to inner B-pillar and inner entrance (area A, B and C).


3

Weld right B-pillar paneling bottom section (1) to B-pillar paneling top section (5) and front door frame panel (4) (3).


Complete inert gas welds at intervals holding a steel or copper block from outside, allow to cool down in between.
Otherwise heat distortion can occur.


Make inert gas welds with a length of approx. 5 mm each at intervals of approx. 30 mm.


4

Level inert gas welds and grind B-pillar panel down flat.


5

Restore surface and smooth.


6

Remove grinding dust.

D63.20-0058-06