ar6320d000101fa

Separating right B-pillar paneling

Typ ar · temat 63.20 · wersja 0100 · 2013-11-22

Dotyczy: MODEL 909

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 63 Ściana boczna › 63.20 Słupki — Seria 909

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.34 Ściana boczna › 35.34.45 Słupek — Seria 909

AR63.20-D-0001-01FA

Separating right B-pillar paneling

MODEL

909

Separating right B-pillar paneling

1

Mark separation line (2) on right B-pillar paneling (1) at top.


Dimensions:
a = approx. 200 mm

D63.20-0045-02

Separating right B-pillar paneling

2

Mark separation line (3) on right B-pillar paneling (1) at bottom.


Dimensions:
b = approx. 260 mm

D63.20-0046-11

Separating right B-pillar paneling

3

Expose spot welds on right B-pillar paneling (1) up to marked separation line (2) and cut out (area A and B).


4

Separate right B-pillar paneling (1) at marked separation line (2).

D63.20-0047-03

Separating right B-pillar paneling

5

Expose spot welds on right B-pillar paneling (1) up to marked separation line (3) and cut out (area A, B and C).


6

Separate right B-pillar paneling (1) at marked separation line (3).


7

Remove right B-pillar paneling (1).


8

Grind mating surfaces down to bare metal.


Sand down spot weld flanges to bare metal on both sides.


9

Remove grinding dust.


10

Coat inside of spot welding flanges with zinc dust paint.

D63.20-0048-06