AR63.10-S-5886-04A | Welding in right sidewall paneling | Model 638 | |
| Copper plate for welding in sheet metal parts | All models |
Workshop equipment
WE58.40-Z-1001-02A | Inert gas welder |
WE58.40-Z-1002-02A | Spot welder |
WE58.40-Z-1003-02A | Multifunction device |
1 Screw side wall paneling (1) onto vehicle with sheet metal screws.
The exact position for the side wall paneling results when the holes (sheet metal screws), made during preparation of the side wall paneling, coincide.
2 Weld right side wall paneling (1) to C-pillar ().
3 Weld right side wall paneling (1) in door sill area (2) ().
4 Weld right side wall paneling (1) in roof area (3) ().
S63.10-0559-03
5 Weld right side wall paneling (1) to D-pillar () (arrows).
S63.10-0562-03
S63.10-0505-01
6 Weld right side wall paneling (1) to wheelhouse and D-pillar reinforcement plate ( ).
7 Weld right side wall paneling (1) to rocker panel ( ).
S63.10-0549-11
Hold copper plate against outside of side wall paneling to prevent sheet metal parts from deforming. The copper plate must make flat contact.
8 Weld right wall side paneling to side wall inner section (5) (, arrows).
S63.10-0551-06
9 Weld right side wall paneling (1) in roof and door sill areas (3, 2) (, arrows).
10 Weld right side wall paneling (1) to C-pillar reinforcement (6) ().
11 Weld right side wall paneling (1) in roof area between roof (3) and side wall paneling (1) ().
12 Unscrew sheet metal screws for positioning and weld screw holes closed ().