201 589 00 51 00
Milling tool for welding points
Workshop equipment
WE58.40-Z-1001-03A | Drill (electric/pneumatic) |
WE58.40-Z-1004-03A | Body saw (electric/pneumatic) |
S63.10-0533-09
1 Expose weld spots in right side paneling (1).
2 Mark weld spots with center punch.
3 Mill exposed weld spots out of the outside of the right side paneling (1).
S63.10-0538-09
4 Separate side paneling (1) in the roof and entrance area with the following dimensions (broken lines, 2):
a = 200 mm.
5 Separate side paneling (1) below the roof connection edge with the following dimensions (broken lines, 3):
b = 15 mm.
6 Take off side paneling (1).
7 Grind open weld spots in remaining panel (4).
8 Remove remaining panel (4).