Shown on left side of vehicle |
1 | Rear inner wheel well |
S61.10-4679-06
Danger | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
Danger | Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC) | Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines.Model 447 with engine 780 | |
Caution | Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. | |
Topical note | General information on vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system as well as personal protective equipment | Model 447 with engine 780 | |
Topical note | Special instructions for lifting and supporting vehicle | ||
Topical note | General information on body repair | ||
General information on riveting | |||
| Remove | ||
1 | Remove all detachable parts in area of repair point. | ||
2 | Cut off inner rear wheel well (1). | ||
| 000 588 00 84 00 Heat gun | ||
Commercially available devices/tools | |||
Zinc dust paint suitable for spot welding | |||
| Install | ||
3 | Install inner rear wheel well (1). | ||
Commercially available devices/tools | |||
Zinc dust paint suitable for spot welding | |||
Blind rivet 6.414 (clamping range 1 mm to 8.5 mm, draw-off strength min. 10.8 kN) | |||
Danger | Risk of explosion caused by paint vapors igniting. Risk of poisoning caused by inhaling paint vapors. | No smoking! No open fire! Use respiratory protection, protective clothing, gloves, safety glasses and protective skin cream. Ensure that the area is well ventilated. | |
4 | Prime repair area with a primer filler. | ||
Topical note | Notes on paintwork repairs | ||
Use only primer filler approved by Daimler AG: | |||
5 | Seal seam after repair. | ||
Danger | Risk of explosion caused by paint vapors igniting. Risk of poisoning caused by inhaling paint vapors. | No smoking! No open fire! Use respiratory protection, protective clothing, gloves, safety glasses and protective skin cream. Ensure that the area is well ventilated. | |
6 | Paint repair area and adjacent surfaces. | ||
Topical note | Notes on paintwork repairs | ||
Use only paints approved by Daimler AG, see: | |||
7 | Supplement cavity preservation. | ||
8 | Install all detachable parts in area of repair point. |
Powiązane dokumenty
- ah0000z030001a Ogólne wskazówki dotyczące pojazdów z instalacją wysokiego napięcia i/lub akumulatorem litowo-jonowym i/lub gazowym systemem napędu oraz osobistego wyposażenia ochronnego
- ah0060n010001a Wskazówki dotyczące podnoszenia pojazdu, ustawiania na podporach
- ah6000n000101a Ogólne wskazówki dotyczące napraw nadwozia
- ah6000p000301n Ogólne wskazówki dotyczące nitowania
- ah9800p940802a Wskazówki dotyczące napraw powłok lakierniczych
- ar6310s067001e
- ar6310s067004e
- ar9710s4000e
- ar9720s1500e
- as0000z001001a Zagrożenie życia na skutek ześlizgnięcia lub spadnięcia pojazdu z podnośnika.
- as0000z001701a Niebezpieczeństwo obrażeńo elementy pojazdu o ostrych krawędziach.
- as0000z003501a Zagrożenie życia podczas prac przy elementach i systemach U >=30 V napięcie zmienne (AC) bądź U >=60 V napięcie zmienne
- as9800z000201a Niebezpieczeństwo eksplozji w wyniku zapalenia się oparów lakierniczych. Niebezpieczeństwo zatrucia na skutek wdychania oparów lakierniczych.
- ws5400p0049b