AR63.10-S-0100-04A | Welding in left side paneling | Model 638 | |
| Copper plate for welding in sheet metal parts | All models |
Workshop equipment
WE58.40-Z-1001-02A | Inert gas welder |
WE58.40-Z-1002-02A | Spot welder |
WE58.40-Z-1003-02A | Multifunction device |
1 Screw side wall paneling (1) to vehicle with sheet metal screws.
The exact position for the side wall paneling results when the holes (sheet metal screws), made during preparation of the side wall paneling, coincide.
2 Weld left side wall paneling (1) to B-pillar ().
3 Weld left side wall paneling (1) in door sill area (2) ().
4 Weld left side wall paneling (1) in roof area (3) ().
S63.10-0518-03
5 Weld left side wall paneling (1) to D-pillar () (arrows).
S63.10-0531-03
S63.10-0504-01
6 Weld left side wall paneling (1) to wheelhouse and D-pillar reinforcement (, arrows).
7 Weld left side wall paneling (1) to rocker panel ( ).
S63.10-0519-11
Hold copper plate against outside of side wall paneling to prevent sheet metal parts from deforming. The copper plate must make flat contact.
8 Weld left side wall paneling to side wall inner section (, arrows).
S63.10-0532-06
9 Weld left side wall paneling (1) in roof area (2) (, arrows).
10 Unscrew sheet metal screws for positioning and weld screw holes closed ().