Model | 447.601 |
with code W16 (Window front left, fixed, in sidewall/sliding door) | |
with code W29 (Window fixed behind) | |
except code T19 (Sliding door left) | |
Model | 447.701 |
with code W16 (Window front left, fixed, in sidewall/sliding door) | |
with code W29 (Window fixed behind) | |
except code T19 (Sliding door left) | |
Model | 447.701 |
with code W16 (Window front left, fixed, in sidewall/sliding door) | |
with code W32 (Ausstellfenster Fahrgastraum hinten elektrisch) | |
except code T19 (Sliding door left) | |
Model | 447.701 |
with code W18 (Sliding window front left in sidew./sliding door) | |
with code W29 (Window fixed behind) | |
except code T19 (Sliding door left) | |
Model | 447.701 |
with code W18 (Sliding window front left in sidew./sliding door) | |
with code W32 (Ausstellfenster Fahrgastraum hinten elektrisch) | |
except code T19 (Sliding door left) | |
Model | 447.811 |
with code W16 (Window front left, fixed, in sidewall/sliding door) | |
with code W29 (Window fixed behind) | |
except code T19 (Sliding door left) | |
Model | 447.811 |
with code W16 (Window front left, fixed, in sidewall/sliding door) | |
with code W32 (Ausstellfenster Fahrgastraum hinten elektrisch) | |
except code T19 (Sliding door left) |
Gap dimensions |
Number | Designation | Model 447, 448 except code W65, W68 | |||
BE60.00-N-1004-01J | Gap dimensions | Front door to longitudinal member | Dimension "DA" | mm | 6 (+2/-1) |
Front door to sidewall | Dimension "DB" | mm | 4 (1) | ||
Front door to sliding door | Dimension "DC" | mm | 4 (+1,2/-0,8) | ||
Front door to A-pillar | Dimension "DD" | mm | 4,5 (+1,5/-1) | ||
Front door to fuel filler door | Dimension "DE" | mm | 4 (1) | ||
For picture, see | |||||
Gap dimensions |
Number | Designation | Model 447, 448 except code W65, W68 | |||
BE60.00-N-1007-01J | Gap dimensions | Sidewall to liftgate | Dimension "GA" | mm | - |
Sidewall to cover on guide rail of sliding door | Dimension "GB" | mm | 1,5 (0,8) | ||
Sidewall to fuel filler door | Dimension "GC" | mm | 4,5 (1) | ||
Glass pane in sidewall at front, all-round | Dimension "GD" | mm | 3 | ||
Sidewall to taillamp | Dimension "GE" | mm | 1,2 (0,5) | ||
Glass pane in sidewall at rear, all-round | Dimension "GF" | mm | 3 | ||
For picture, see | |||||
Gap dimensions |
Number | Designation | Model 447, 448 except code W65, W68 | |||
BE60.00-N-1008-01J | Gap dimensions | Rear window in liftgate, all-round | Dimension "HA" | mm | - |
Folding rear window in liftgate, all-round | Dimension "HB" | mm | - | ||
Liftgate to taillamp | Dimension "HC" | mm | - | ||
Liftgate to bumper at side | Dimension "HD" | mm | - | ||
Liftgate to bumper at bottom | Dimension "HE" | mm | - | ||
Liftgate to roof frame | Dimension "HF" | mm | - | ||
For picture, see | - | ||||
Gap dimensions |
Number | Designation | Model 447, 448 except code W65, W68 | |||
BE60.00-N-1009-01J | Gap dimensions | Left rear-end door to right rear-end door | Dimension "IA" | mm | 6 (1) |
Rear-end door to bumper at side | Dimension "IB" | mm | 4,5 (1) | ||
Rear-end door to bumper at bottom | Dimension "IC" | mm | 6 (1,5) | ||
Rear-end door to taillamp | Dimension "ID" | mm | 6,4 (1) | ||
Rear-end door to cover over taillamp | Dimension "IE" | mm | 6,4 (1) | ||
Rear-end door to roof frame | Dimension "IF" | mm | 7 (1,5) | ||
Rear window in rear-end door, all-round | Dimension "IG" | mm | 4 (1) | ||
For picture, see | |||||
129 589 03 21 00
Feeler gauge
1 | Install side wall paneling (1), driver door, liftgate or rear-end door, seal and lock striker and fit. |
2 | Check gaps using feeler gauge and adjust. |
3 | Fix sidewall paneling (1) in place. |
4 | Remove driver door, liftgate or rear-end door, seal and lock striker. |
5 | Drill Ø 7.1 mm rivet holes in side wall paneling (1) at defined punch marks (area A). |
6 | Drill Ø 7.1 mm rivet holes in side wall paneling (1) at defined punch marks (area B). |
Only on vehicles with rear-end door. |
7 | Remove side wall paneling (1). |
8 | Deburr rivet holes on both sides. |
9 | Coat insides of riveted joints with zinc dust paint. |
S63.10-5789-06
10 | Apply sealant to body. |
S63.10-5790-06
S63.10-5791-09
11 | Install side wall paneling (1) and fit. |
12 | Fix sidewall paneling (1) in place. |
13 | Side wall paneling (1) (areas C to E). |
14 | Side wall paneling (1) (areas F to H). |
Inert gas weld in intervals and allow to cool down in between. Reduces heat distortion. |
15 | Side wall paneling (1) (areas I to K). |
S63.10-5792-09
16 | Side wall paneling (1) (areas L and M). |
17 | Side wall paneling (1) (area N). |
Inert gas weld in intervals and allow to cool down in between. Reduces heat distortion. |
18 | Drill side wall paneling (1) before inert gas welding (arrows). |
19 | Side wall paneling (1) (areas O and P). |
20 | Install blind rivet nut M5 (area Q). |
Only on vehicles with rear-end door. |
21 | Install blind rivet nuts M5 (areas R and R1). |
S63.10-5793-09
a | Dimension approx. 3 mm |
22 | Scribe separating points and cut (areas S and T). |
23 | Remove separated sections on side wall paneling (1). |
24 | Grind inert gas welds and inert gas spot welds down flat. |
25 | Clean weld joints. |
26 | Restore and smooth surfaces on side wall paneling (1). |
27 | Remove shavings and drill chips. |