P63.10-4189-06
1 Measure position of cut (A) on outer rear wheelhouse (1) according to dimension (a) and scribe.
Transfer measure (a) from removed part.The other cut (A) runs along the edge.
2 Cut (A) along broken line on outer rear wheelhouse (1) using body saw and removed remaining piece.using body saw
P63.10-4218-12
3 Grind mating surfaces on outer rear wheelhouse (1) down to bare metal in cross-hatched areas using round wire brush on both sides (areas B, C, D, D1, E, F and G).
4 Remove grinding and drill shavings using wet/dry vacuum cleaner.
5 Coat insides of spot weld flange with zinc dust paint (areas B, C, D1 and E).
Observe information on pretreatment of bonding surfaces.