Cutting template
170 589 03 23 00
Commercially available tools
Number | Designation | |
WH58.30-Z-1001-02A | Hole punching pliers, dia. 6 mm. | |
WH58.30-Z-1001-03A | Round wire brush, braided, dia. 70 mm | |
WH58.30-Z-1024-04A | Abrasive disk, dia. 115 mm, 80 m/s (max. 13,250 rpm) |
Workshop equipment
WE58.40-Z-1001-03A | Drill (electric/pneumatic) |
WE58.40-Z-1003-03A | Angle grinder (electric/pneumatic) |
WE58.40-Z-1004-03A | Body saw (electric/pneumatic) |
P63.10-0620-06
1 Mark longitudinal member at side with aid of cutting template and cut (analog to cutting point on vehicle).
Then grind connection surfaces down to bare metal in shaded areas.
Grind spot welding flanges down to bare metal on both sides. Coat insides of spot welding flanges with zinc dust paint.
Then punch 6 mm dia. holes at bottom of side wall (areas A and B).