Welding in right side wall paneling bottom section

AR63.10-D-5913-04FB

Welding in right side wall paneling bottom section

 Danger

The high voltage used for electric welding presents a lethal hazard. Risk of explosion from welding in areas close to highly inflammable materials. Risk of injury from weld splatter and UV-light when welding. Risk of poisoning from inhaling welding gases

Use insulating mats. Wear protective clothing, safety glasses and a protective mask. Remove highly inflammable materials from the hazard area. Use air extraction system.

AS00.00-Z-0007-01A

 Warning

Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.

Wear protective gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

 Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

Topical note

Measures for preventing damage to vehicles or components when performing electric welding work

AH00.00-N-0005-01A

Topical note

General information on body repair

AH60.00-N-0001-01A

Model

909.843

except code T16 (Sliding door right)

except code W03 (Body extension)

1

Install side wall paneling (1), fit and fix in place.

2

Side wall paneling (1)   on sheet metal strips (area A).

3

Side wall paneling (1)   (area B, C and D).

4

Side wall paneling (1)   (areas P).

 Counterhold steel and copper block (approx. 25 mm x 25 mm x 200 mm) from outside.
Otherwise the sheet steel parts can distort.

5

Side wall paneling (1)   (area G).

6

Sidewall paneling (1)   (Area H).