Separate right side wall paneling up to window cutout

AR63.10-D-5892-01FB

Separate right side wall paneling up to window cutout

 Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

Topical note

General information on body repair

AH60.00-N-0001-01A

Model

909.843

except code T16 (Sliding door right)

except code W03 (Body extension)

1

Expose spot welds on side wall paneling (1) and cut out with  spot weld milling cutter (areas A, B and C).

3

Mark connecting points on sidewall paneling (1) and cut (areas B and E).

 Do not make the cuts too deep.
Otherwise the components below can be damaged and weakened.

 Dimensions:
d = 50 mm
e = 50 mm

4

Mark separating points on side wall paneling (1) approx. 1 mm in front of beaded edge and cut (area F and G).

 Do not make the cuts too deep.
Otherwise the components below can be damaged and weakened.

5

Remove side wall paneling (1).