ar6310d588601fb

Separate right side wall paneling

Typ ar · temat 63.10 · wersja 0100 · 2017-03-13

Dotyczy: Model 909.843 except code T16 (Sliding door right) except code W03 (Body extension)

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 63 Ściana boczna › 63.10 Ściana boczna — Seria 909 (modele 843)

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.34 Ściana boczna › 35.34.35 Błotnik/ ściana boczna — Seria 909 (modele 843)

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.34 Ściana boczna › 35.34.39 Poszycie z prawej strony — Seria 909 (modele 843)

AR63.10-D-5886-01FB

Separate right side wall paneling

Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

Topical note

General information on body repair

AH60.00-N-0001-01A

Model

909.843

except code T16 (Sliding door right)

except code W03 (Body extension)

Separate right side wall paneling

201 589 00 51 00

Spot weld milling cutter

Separate right side wall paneling

D63.10-1862-09

1

Expose spot welds on side wall paneling (1) and cut out with spot weld milling cutter (areas A and B).

Separate right side wall paneling

3

Mark separating points on side wall paneling (1) approx. 1 mm in front of beaded edge and cut (areas C, D and E).


Do not make the cuts too deep.
Otherwise the components below can be damaged and weakened.



4

Remove side wall paneling (1).


D63.10-1863-12

Powiązane dokumenty