ar6310d566601ts

Cut off lower rear side wall paneling in front of wheel arch

Typ ar · temat 63.10 · wersja 0100 · 2018-03-19

Dotyczy: Type 907.6/7 met code T16 (Sliding door right) Right side of vehicle Type 907.6/7 met code T19 (Sliding door left) Left side of vehicle Type 910.6 met code T16 (Sliding door right) Right side of vehicle Type 910.6 met code T19 (Sliding door left) Left side of vehicle

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 63 Ściana boczna › 63.10 Ściana boczna — Seria 907 (modele 6**, 7**) · Seria 910 (modele 6**)

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.34 Ściana boczna › 35.34.35 Błotnik/ ściana boczna — Seria 907 (modele 6**, 7**) · Seria 910 (modele 6**)

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.34 Ściana boczna › 35.34.38 Poszycie z lewej strony — Seria 907 (modele 6**, 7**) · Seria 910 (modele 6**)

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.34 Ściana boczna › 35.34.39 Poszycie z prawej strony — Seria 907 (modele 6**, 7**) · Seria 910 (modele 6**)

AR63.10-D-5666-01TS

Cut off lower rear side wall paneling in front of wheel arch

Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

000 588 00 84 00 Heat gun

WS54.00-P-0049B

Type

907.6/7

met code T16 (Sliding door right)

Right side of vehicle

Type

907.6/7

met code T19 (Sliding door left)

Left side of vehicle

Type

910.6

met code T16 (Sliding door right)

Right side of vehicle

Type

910.6

met code T19 (Sliding door left)

Left side of vehicle

Repair materials

Number

Designation

Order number

BR00.45-Z-1056-07A

1K-zinc dust paint

A 000 986 28 00

The next steps are shown on model 907.633 with code D03 (roof and rear-end doors, high version) and code T16 (right sliding door) on the right side of the vehicle and must be carried out in the same way for vehicles with code T19 (left sliding door) on the left side of the vehicle in the event of damage.

Cut off lower rear side wall paneling in front of wheel arch

D63.10-2035-09

1

Expose spot welds on bottom rear sidewall paneling in front of the wheel arch (1) (areas A, B, C, D, and E).

Commercially available devices/tools
Rotary wire brush

2

Cut out spot welds on bottom rear sidewall paneling in front of the wheel arch (1) (areas A, B, C, D, and E).

Commercially available devices/tools
Spot weld milling machine

3

Heat bottom rear sidewall paneling in front of the wheel arch (1) in cross-hatched area (area F).

Cross-hatched area (area F) is bonded.

4

Remove damaged lower rear sidewall paneling in front of wheel arch (1).

Cut off lower rear side wall paneling in front of wheel arch

D63.10-2036-09

5

Grind down mating surfaces to bare metal in cross-hatched areas.

Sand down spot weld flanges to bare metal on both sides.

Commercially available devices/tools
Rotary wire brush

6

Level adhesive residue in hatched area to 1 mm.

7

Remove shavings and milling chips.

Commercially available devices/tools
Wet and dry vacuum cleaner

8

Zinc dust paint to insides of spot weld flanges.

Powiązane dokumenty