Additional information can be found in the superordinate service document.
The safety information in the superordinate service document must be observed.
The following operation steps are shown on the left component part in model 907.733 and must be similarly performed on the right side of the vehicle in the case of damage.
D63.10-2182-09
1 | Grind wheel well (1) down to bare metal on both sides in cross-hatched areas. |
Commercially available devices/tools |
2 | Remove shavings. |
Commercially available devices/tools |
3 | Zinc dust paint to insides of spot weld flanges. |
4 | Grind wheel well (1) down to bare metal on both sides in cross-hatched areas. |
Commercially available devices/tools |
5 | Remove shavings. |
Commercially available devices/tools |
6 | Zinc dust paint to insides of spot weld flanges. |
D63.10-2171-06