ar6310d067004ts

Install rear inner wheel well

Typ ar · temat 63.10 · wersja 0100 · 2018-09-24

Dotyczy: Model 907.6/7, 910.6

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 63 Ściana boczna › 63.10 Ściana boczna — Seria 907 (modele 6**, 7**) · Seria 910 (modele 6**)

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.34 Ściana boczna › 35.34.41 Belka/ nadkole — Seria 907 (modele 6**, 7**) · Seria 910 (modele 6**)

AR63.10-D-0670-04TS

Install rear inner wheel well

000 588 01 84 00 Welder

WS60.00-P-0021K

000 588 02 84 00 Welder

WS60.00-P-0022K

Model

907.6/7, 910.6

Additional information can be found in the superordinate service document.

The safety information in the superordinate service document must be observed.

The following operation steps are shown for model 910.633 on the left side of the vehicle and must be similarly performed on the right side of the vehicle in the case of damage.

Install rear inner wheel well

1

Install wheel well (1), fit and fix in place.


Commercially available devices/tools
Clamping pliers (Standard)



2

Wheel well (1) (area A).


D63.10-A005-06

Install rear inner wheel well

D63.10-A006-08

3

Wheel well (1) (area B).

4

Grind inert gas plug welds down to bare metal (area B).

Commercially available devices/tools
Angular grinder

5

Remove shavings.

Commercially available devices/tools
Wet and dry vacuum cleaner

Powiązane dokumenty