MODEL | 909.843 |
without CODE W03 (Body extension) |
1 | Install left side wall paneling (1), fit and fix in place. |
Bond left side wall paneling (1) to side wall reinforcement (3). |
D63.10-1812-06
2 | Weld left side wall paneling (1) to drip rail (6) (arrows). |
3 | Weld left side wall paneling (1) to corner pillar paneling (5) and front side wall paneling (14) (arrows). |
Complete inert gas welds at intervals holding a steel or copper block from outside, allow to cool down in between. |
Make inert gas welds with a length of approx. 5 mm each at intervals of approx. 30 mm. |
D63.10-1786-12
4 | Weld left side wall paneling (1) to inner side wall (10) (arrows). |
5 | Weld left side wall paneling (1) to window cutout on inner side wall (10) (arrows). |
D63.10-1813-12
6 | Cut out window cutout on left side wall paneling (1) along window cutout on inner side wall (10) (broken line). |
7 | Remove burrs on cut edges. |
D63.10-1814-12
8 | Weld left side wall paneling (1) to inner side wall (10) (arrows). |
D63.10-1815-12
9 | Weld left side wall paneling (1) to inner front side wall and wheel arch (arrows). |
D63.10-1788-01
10 | Weld left side wall paneling (1) to rear inner side wall and wheel arch (arrows). |
11 | Grind left side wall paneling (1) down flat. |
12 | Restore surface and smooth. |
13 | Remove grinding dust. |
D63.10-1789-01