ar6310d010001f

Separate left side wall paneling

Typ ar · temat 63.10 · wersja 0100 · 2013-11-07

Dotyczy: MODEL 909.6 MODEL 909.843 without CODE W03 (Body extension)

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 63 Ściana boczna › 63.10 Ściana boczna — Seria 909 (modele 6**, 843)

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.34 Ściana boczna › 35.34.35 Błotnik/ ściana boczna — Seria 909 (modele 6**, 843)

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.34 Ściana boczna › 35.34.38 Poszycie z lewej strony — Seria 909 (modele 6**, 843)

AR63.10-D-0100-01F

Separate left side wall paneling

MODEL

909.6

MODEL

909.843

without CODE W03 (Body extension)

Separate left side wall paneling

1.1

MODEL 909.6
Use hot-air gun to carefully heat up sidewall flange (2) and side wall reinforcements (3) in the cargo area and loosen bonded connections to left side wall paneling (1).


1.2

MODEL 909.843
without CODE W03 (Body extension)
Use hot-air gun to carefully heat up side wall reinforcements (3) in the cargo area and loosen bonded connections to left side wall paneling (1).

D63.10-1779-06

Separate left side wall paneling

D63.10-1780-09

2

Expose spot welds in left side wall paneling (1) and cut out (arrows).

Separate left side wall paneling

3

Separate left side wall paneling (1) along corner pillar paneling (5), drip rail (6) and front side wall paneling (14) (arrows).


Do not make the cuts too deep.
Otherwise the components below can be damaged and weakened.


4

Remove left side wall paneling (1).

D63.10-1781-12