ar6310d004303ts

Install and weld inner section of side wall paneling

Typ ar · temat 63.10 · wersja 0100 · 2019-02-14

Dotyczy: Model 907.6/7, 910.6

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 63 Ściana boczna › 63.10 Ściana boczna — Seria 907 (modele 6**, 7**) · Seria 910 (modele 6**)

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.34 Ściana boczna › 35.34.35 Błotnik/ ściana boczna — Seria 907 (modele 6**, 7**) · Seria 910 (modele 6**)

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.34 Ściana boczna › 35.34.38 Poszycie z lewej strony — Seria 907 (modele 6**, 7**) · Seria 910 (modele 6**)

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.34 Ściana boczna › 35.34.39 Poszycie z prawej strony — Seria 907 (modele 6**, 7**) · Seria 910 (modele 6**)

AR63.10-D-0043-03TS

Install and weld inner section of side wall paneling

000 588 01 84 00 Welder

WS60.00-P-0021K

000 588 02 84 00 Welder

WS60.00-P-0022K

Model

907.6/7, 910.6

Additional information can be found in the superordinate service document.

The safety information in the superordinate service document must be observed.

The next steps are shown on the left side of the vehicle for model 907.633 and must be performed in a similar manner for vehicles with damage on the right side of the vehicle.

Install and weld inner section of side wall paneling

D63.10-A014-09

1

Install inside part of sidewall (1), fit and fix in place.

Commercially available devices/tools
Clamping pliers (Standard)

2

Inside part of sidewall (1) (areas A and B).

3

Tack inside part of sidewall (1) (area C).

4

Inside part of sidewall (1) (areas A1 and B1).

5

Surface grind inert gas plug welds (areas A1 and B1) and the inert gas plug tacks (area C).

Commercially available devices/tools
Angular grinder

6

Remove shavings.

Commercially available devices/tools
Wet and dry vacuum cleaner

Install and weld inner section of side wall paneling

D63.10-A015-08

7

The roof frame (area D).

8

Surface-grind inert gas plug welds (area D).

Commercially available devices/tools
Angular grinder

9

Remove shavings.

Commercially available devices/tools
Wet and dry vacuum cleaner

Install and weld inner section of side wall paneling

10

Inside part of sidewall (1) (area E), reinforcement (2) (area F), and reinforcement (3) (area G) .



11

Reinforcement (2) (area I) and reinforcement (3) (area H) .



12

Clean weld joints.


Commercially available devices/tools
Rotary wire brush



13

Remove shavings.


Commercially available devices/tools
Wet and dry vacuum cleaner


D63.10-A016-06

Powiązane dokumenty