MODEL | 909.843 |
with CODE W03 (Body extension) |
D63.10-1727-09
The following operation steps are shown on the left side of the vehicle on model 909.843 and must be performed analogously on the right side in the event of damage.
1 |
Cut weld seams on inner sidewall (1) (area A). |
2 |
Expose spot welds on inner sidewall (1) and cut out (areas B, C and D). |
Cut out area B from outside. |
D63.10-1728-09
3 |
Cut weld seams on inner sidewall (1) (areas E, F and G). |
4 |
Expose spot welds on inner sidewall (1) and cut out (areas H, J and K). |
5 | Expose spot welds on inner sidewall (1) and cut out (area L). |
6 | Remove inner sidewall (1). |
D63.10-1729-06
D63.10-1730-09
7 |
Grind mating surfaces down to bare metal in the cross-hatched inner C-pillar sidewall . |
Sand down spot weld flanges to bare metal on both sides. |
8 |
Remove grinding dust and drill chips. |
9 |
Coat inside of spot welding flanges with zinc dust paint. |