ar6310d002502ts

Prepare front side wall paneling up to window cutout for installation

Typ ar · temat 63.10 · wersja 0100 · 2018-02-13

Dotyczy: Model 907.6 with code W16 (Window front left, fixed, in sidewall/sliding door) except code T19 (Sliding door left) Left side of vehicle Model 907.6 with code W17 (Window front right, fixed, in sidew./sliding door) except code T16 (Sliding door right) Right side of vehicle Model 907.6 with code W18 (Sliding window front left in sidew./sliding door) except code T19 (Sliding door left) Left side of vehicle Model 907.6 with code W19 (Sliding window front right in sidew./sliding door) except code T16 (Sliding

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 63 Ściana boczna › 63.10 Ściana boczna — Seria 907 (modele 6**, 7**) · Seria 910 (modele 6**)

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.34 Ściana boczna › 35.34.35 Błotnik/ ściana boczna — Seria 907 (modele 6**, 7**) · Seria 910 (modele 6**)

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.34 Ściana boczna › 35.34.38 Poszycie z lewej strony — Seria 907 (modele 6**, 7**) · Seria 910 (modele 6**)

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.34 Ściana boczna › 35.34.39 Poszycie z prawej strony — Seria 907 (modele 6**, 7**) · Seria 910 (modele 6**)

AR63.10-D-0025-02TS

Prepare front side wall paneling up to window cutout for installation

Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

Model

907.6

with code W16 (Window front left, fixed, in sidewall/sliding door)

except code T19 (Sliding door left)

Left side of vehicle

Model

907.6

with code W17 (Window front right, fixed, in sidew./sliding door)

except code T16 (Sliding door right)

Right side of vehicle

Model

907.6

with code W18 (Sliding window front left in sidew./sliding door)

except code T19 (Sliding door left)

Left side of vehicle

Model

907.6

with code W19 (Sliding window front right in sidew./sliding door)

except code T16 (Sliding door right)

Right side of vehicle

Model

907.7

except code T16 (Sliding door right)

Right side of vehicle

Model

907.7

except code T19 (Sliding door left)

Left side of vehicle

Model

910.6

with code W16 (Window front left, fixed, in sidewall/sliding door)

except code T19 (Sliding door left)

Left side of vehicle

Model

910.6

with code W17 (Window front right, fixed, in sidew./sliding door)

except code T16 (Sliding door right)

Right side of vehicle

Repair materials

Number

Designation

Order number

BR00.45-Z-1056-07A

1K-zinc dust paint

A 000 986 28 00

The next steps are shown on the left component part and must be carried out in the same way for vehicles except code T16 (right sliding door) on the right side of the vehicle in the event of damage.

Prepare front side wall paneling up to window cutout for installation

1

Scribe separation line on front side wall paneling up to window cutout (1) (area A).


Take over separation line from vehicle (area A).



2

Separate front side wall paneling up to window cutout (1) at separating point (area A).



3

Dispose of cut-off remaining piece.


D63.10-2019-11

Prepare front side wall paneling up to window cutout for installation

D63.10-2020-08

4

Punch holes in front side wall paneling up to window cutout (1) with a diameter of 6 mm (areas B and D).

5

Drill holes in front side wall paneling up to window cutout (1) with a diameter of 7 mm (area C).

6

Remove drilling chips.

Prepare front side wall paneling up to window cutout for installation

D63.10-2021-08

7

Grind mating surfaces on front side wall paneling up to window cutout (1) down to bare metal in cross-hatched areas and around holes.

Sand down spot weld flanges to bare metal on both sides.

8

Remove shavings.

9

Zinc dust paint to insides of spot weld flanges.

Powiązane dokumenty