ar6310d000102f
Preparing connection points for left side wall paneling up to character bead
Typ ar · temat 63.10 · wersja 0100 · 2013-11-22
Dotyczy: MODEL 909.6 MODEL 909.843 without CODE W03 (Body extension)
Niedostępne w języku „pl”; wyświetlono w języku Angielski.
Umiejscowienie
Grupa funkcyjna 3 Nadwozie › 63 Ściana boczna › 63.10 Ściana boczna — Seria 909 (modele 6**, 843)
EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.34 Ściana boczna › 35.34.35 Błotnik/ ściana boczna — Seria 909 (modele 6**, 843)
EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.34 Ściana boczna › 35.34.38 Poszycie z lewej strony — Seria 909 (modele 6**, 843)
AR63.10-D-0001-02F
| Preparing connection points for left side wall paneling up to character bead
|
|
|
MODEL
| 909.6
|
MODEL
| 909.843
|
|
| without CODE W03 (Body extension)
|
1
| Grind down sheet metal remains (8) up to edge of outer corner pillar paneling (5).
|
2
| Carefully grind down sheet metal remains (15) up to edge of front side wall paneling (14).
|
3
| MODEL 909.633
MODEL 909.843
without CODE W03 (Body extension)
Remove adhesive residues in area of above wheel well.
|
|
| Side wall paneling was bonded in area above wheel well.
|
4
| Drill holes for plug welding on inner sidewall (10) (arrows).
|
5
| Measure distance (a) between C-pillar (12) and end of bead (17).
|
6
| Cut sheet metal strips (18) to size.
|
|
| Dimensions:
b = measured distance - 80 mm
c = 40 mm
d = 1.5 mm
|
7
| Grind top side of sheet metal strips (18) down to bare metal.
|
8
| Weld sheet metal strips (18) on bead (17) (arrows).
|
9
| Grind weld seams down flat (arrows).
|
