ar6310d000101f
Separating left side wall paneling up to character bead
Typ ar · temat 63.10 · wersja 0100 · 2013-11-20
Dotyczy: MODEL 909.6 MODEL 909.843 without CODE W03 (Body extension)
Niedostępne w języku „pl”; wyświetlono w języku Angielski.
Umiejscowienie
Grupa funkcyjna 3 Nadwozie › 63 Ściana boczna › 63.10 Ściana boczna — Seria 909 (modele 6**, 843)
EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.34 Ściana boczna › 35.34.35 Błotnik/ ściana boczna — Seria 909 (modele 6**, 843)
EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.34 Ściana boczna › 35.34.38 Poszycie z lewej strony — Seria 909 (modele 6**, 843)
AR63.10-D-0001-01F
| Separating left side wall paneling up to character bead
|
|
|
MODEL
| 909.6
|
MODEL
| 909.843
|
|
| without CODE W03 (Body extension)
|
1
|
Expose spot welds in side wall paneling bottom section (1) and cut out (areas between arrows).
|
2
| Scribe cut (18) at side wall paneling (2) along corner pillar paneling (5) up to bead (17) and cut.
|
|
| Do not make the cuts too deep.
Otherwise the components below can be damaged and weakened.
|
3
| Scribe cut (19) at side wall paneling (2) along front corner pillar paneling (14) up to bead (17) and cut.
|
|
| Do not make the cuts too deep.
Otherwise the components below can be damaged and weakened.
|
|
| Cut vertical cut (19) as near as possible on front side wall paneling (14).
|
4
| Scribe cut (16) at bead (17) and cut.
|
5
| MODEL 909.633
MODEL 909.843
without CODE W03 (Body extension)
Heat side wall paneling in area above wheel well.
|
|
| Side wall paneling is glued in area above wheel well.
|
6
| Remove side wall paneling bottom section.
|
