ar6220s185604e

Remove crossmember from left front longitudinal member

Typ ar · temat 62.20 · wersja 0101 · 2016-02-04

Dotyczy: Model 447, 448

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 62 Przód pojazdu i przegroda czołowa › 62.20 Nadkole — Seria 447 · Seria 448

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.30 Przednia część pojazdu › 35.30.35 Belka/ nadkole — Seria 447 · Seria 448

AR62.20-S-1856-04E

Remove crossmember from left front longitudinal member

Model

447, 448

Remove crossmember from left front longitudinal member

S62.20-5406-09

1

Expose spot welds on crossmember on front longitudinal member (1) and cut out (area A).

Cut out spot welds (arrows) through two panel thicknesses.

2

Heat crossmember on front longitudinal member (1) in crosshatched areas (areas B and C).

Crosshatched areas are bonded.

3

Remove damaged crossmember on front longitudinal member (1).

Remove crossmember from left front longitudinal member

S62.20-5407-09

4

Grind mating surfaces down to bare metal in crosshatched areas and around the holes (area D).

5

Remove shavings and drill chips.