S62.20-5416-09
1 | Expose spot welds on new wheel well with longitudinal member (1) and cut out (areas A to C). |
2 | Remove front kick panel front section (4) from new wheel well with longitudinal member (1). |
3 | Drill holes for MAG welding on longitudinal member reinforcement (2) (area D). |
4 | Grind mating surfaces down to bare metal in crosshatched areas and around the holes (area D). |
S62.20-5417-07
5 | Drill holes for MAG welding on front kick panel front section (4) (areas E and F). |
6 | Grind mating surfaces down to bare metal in crosshatched areas and around holes (areas E to I). |
Grind mating surfaces around holes (area E) down to bare metal from inside. |
7 | Drill holes for MAG welding on front kick panel rear section (3) (areas L to N). |
8 | Grind mating surfaces around holes (areas L to N) down to bare metal. |
S62.20-5271-06
S62.20-5272-09
9 | Drill holes for MAG welding on wheel well section with longitudinal member (5) (areas O to U). |
10 | Grind mating surfaces on wheel well section with longitudinal member (5) around holes (areas O to U) down to bare metal. |
Grind mating surfaces around holes (areas R, T and U) from inside down to bare metal. |
S62.20-5273-09
11 | Drill holes for MAG welding on wheel well section with longitudinal member (5) (areas O to U). |
12 | Grind mating surfaces on wheel well with longitudinal member (5) around holes (areas V to Y) down to bare metal. |
13 | Drill holes for MAG welding on wheel well section with longitudinal member (5) (areas Z, AA and AC). |
14 | Grind mating surfaces on wheel well section with longitudinal member (5) around holes (areas Z, AA and AC) down to bare metal. |
S62.20-5274-06
S62.20-5278-09
15 | Grind mating surfaces on wheel well section with longitudinal member (5) down to bare metal in crosshatched area. |
16 | Remove shavings and drill chips. |
17 | Grind mating surfaces on wheel well section with longitudinal member (5) down to bare metal in crosshatched area. |
18 | Remove shavings. |
S62.20-5418-06