ar6220s128702e

Partially prepare upper front longitudinal member

Typ ar · temat 62.20 · wersja 0200 · 2020-03-19

Dotyczy: Model 447, 448

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 62 Przód pojazdu i przegroda czołowa › 62.20 Nadkole — Seria 447 · Seria 448

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.30 Przednia część pojazdu › 35.30.35 Belka/ nadkole — Seria 447 · Seria 448

AR62.20-S-1287-02E

Partially prepare upper front longitudinal member

Model

447, 448

Modification notes

20.02.2020

Repair materials reference BR00.45-Z-1001-07A added.

Step 4

Repair materials

Number

Designation

Order number

BR00.45-Z-1001-07A

Zinc dust paint suitable for spot welding

A 000 986 34 42

Refer to the superordinate service document for further information.
Safety information in superordinate service document must be observed.

The following operation steps are shown on the right side of the vehicle and must be similarly performed on the left side of the vehicle in the case of damage.

Partially prepare upper front longitudinal member

S62.20-5197-09

1

Mark separating point on the new top front longitudinal member part (1) (area A).

2

Cut separating point on the new top front longitudinal member part (1) (area A).

Transfer separation point from vehicle.

3

Grind mating surfaces on new upper front longitudinal member (1) down to bare metal in crosshatched areas.

Sand down spot weld flanges to bare metal on both sides.

4

Remove shavings and drill chips.

5

Coat insides of spot weld flanges with zinc dust paint.