Remove/install brake booster support

AR62.20-S-0030E

Remove/install brake booster support

10.03.2020

Model

447.### 2# with engine 780.702

1

Brake booster support

2

Bolts

1

Brake booster support

3

Brake fluid reservoir

 Danger

Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC)

Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines.

AS00.00-Z-0035-01A

 Danger

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

 Caution

Risk of poisoning from swallowing brake fluid. Risk of injury from skin and eye contact with brake fluid

Only pour brake fluid into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid.

AS42.50-Z-0001-01A

Topical note

General information on vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system as well as personal protective equipment

AH00.00-Z-0300-01A

 

Remove/install

1

Secure brake booster support (1) against falling down.

2

Remove lower engine compartment lining

AR61.20-S-1105E

3

Remove screw/bolts (2) .

 Screw, support for brake booster to front longitudinal member

*BA62.20-N-1002-01A

4

Lower vehicle.

5

Remove engine stabilizer mount on top right engine carrier.

AR22.10-S-1146F

6

Remove brake fluid reservoir (3).

AR42.10-S-0301E

7

Remove brake booster support (1).

8

Install in the reverse order.

9

Install in the reverse order.

 Front longitudinal member

Number

Designation

Model 447, 448

BA62.20-N-1002-01A

Screw, support for brake booster to front longitudinal member

Nm

20