Prepare upper front longitudinal member · ar6220d128602ts · Mercedes-Benz WIS

AR62.20-D-1286-02TS	Prepare upper front longitudinal member
 Caution	Risk of injury caused by scraping or cutting body parts on sharp vehicle parts	Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. Deburr repair panels.	AS00.00-Z-0017-01A

Model

907, 910

Repair materials

Number	Designation	Order number
BR00.45-Z-1056-07A	1K-zinc dust paint	A 000 986 28 00

 The next steps are shown on the left component part and must be performed in a similar way in the event of damage on the right side of the vehicle.

1	Punch holes on the upper front longitudinal member (1) with diameter 6 mm (areas G and H).

2	Model 907 Punch holes on the upper front longitudinal member (1) with diameter 6 mm (area I) (picture A).

3	Model 907 Grind area around holes down to bare metal (area I) (picture A).

4	Grind mating surfaces in cross-hatched areas and around holes down to bare metal (areas G and H).

 Model 907
See Fig. A.

 Model 910
See Fig. B.

 Sand down spot weld flanges to bare metal on both sides.

5	Remove shavings.

6	Zinc dust paint to insides of spot weld flanges.

D62.20-0133-03

as0000z001701a Niebezpieczeństwo obrażeńo elementy pojazdu o ostrych krawędziach.