ar6110s176501e

Remove inner rear longitudinal member

Typ ar · temat 61.10 · wersja 0101 · 2016-05-25

Dotyczy: Model 447, 448

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 61 Część dolna › 61.10 Podłoga ramowa — Seria 447 · Seria 448

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.32 Podwozie › 35.32.35 Płyta podłogowa/szkielet podwozia — Seria 447 · Seria 448

AR61.10-S-1765-01E

Remove inner rear longitudinal member

Model

447, 448

Remove inner rear longitudinal member

1

Model 447.7, 448.7
with code UR1 (Seat rail system with quick-release attachment system)
Model 447.7, 448.7
with code UR3 (Seat mount with quick fastener (2 passenger seat rows))
Model 447.7
with code UR6 (Rear seats with quick-release locks (1st row))
Model 447.7
with code ZU4 (Production Argentina)
Model 447.8, 448.8
Expose inner spot welds on inner crossmember (2) and cut out (areas A and B).


S61.10-4858-06

2

Model 447.7, 448.7
with code UR1 (Seat rail system with quick-release attachment system)
Model 447.7, 448.7
with code UR3 (Seat mount with quick fastener (2 passenger seat rows))
Model 447.7
with code UR6 (Rear seats with quick-release locks (1st row))
Model 447.7
with code ZU4 (Production Argentina)
Model 447.8, 448.8
Remove damaged inner crossmember (2).

Remove inner rear longitudinal member

S61.10-4818-09

3

Expose spot welds on inner rear longitudinal member (1) and cut out (areas C to F).

4

Expose MAG weld seams on inner rear longitudinal member (1) and cut out (areas G to K).

Remove inner rear longitudinal member

S61.10-4819-09

5

Expose spot welds on inner rear longitudinal member (1) and cut out (area L).

6

Expose MAG weld seams on inner rear longitudinal member (1) and cut out (areas M to O).

7

Remove damaged inner rear longitudinal member (1).

Remove inner rear longitudinal member

S61.10-4820-09

8

Sand down mating surfaces to bare metal in crosshatched areas .

Sand down spot weld flanges to bare metal on both sides.

9

Remove shavings and drill chips.

10

Coat insides of spot weld flanges with zinc dust paint.

Remove inner rear longitudinal member

11

Sand down mating surfaces to bare metal in crosshatched areas .


Sand down spot weld flanges to bare metal on both sides.



12

Remove shavings and drill chips.



13

Coat insides of spot weld flanges with zinc dust paint.


S61.10-4821-06