Separate section from front frame longitudinal member and grind down connecting plates

AR61.10-D-5899-01F

Separate section from front frame longitudinal member and grind down connecting plates

Model

909

Repair materials

Number

Designation

Order number

BR00.45-Z-1001-07A

Zinc dust paint suitable for spot welding

A 000 986 34 42

1

Expose spot welds (arrows) and cut out with  spot weld milling cutter.

2

Mark separation line (4) on both sides and bottom of front longitudinal frame member (3).

 Dimensions:
a = 55 mm (measured from vehicle jack support point (5))

3

Separate front longitudinal frame member (3) along separation line (4).

4

Uniformly drill 11 Ø 10 mm holes (arrow) in area of (6) of front longitudinal frame member (3).

 Dimensions:
b = 50 mm

5

Uniformly drill 5 holes (arrow) with Ø 10 mm in area (7) of front frame longitudinal member (3).

 Dimensions:
b = 50 mm

6

Uniformly drill 11 Ø 10 mm holes (arrow) in area of (8) of front longitudinal frame member (3).

 Dimensions:
b = 50 mm

7

Bereiche (6, 7 und 8) beidseitig blank schleifen und mit Zinkstaubfarbe .