Separating section of connection element in cab

AR61.10-D-0003-01F

Separating section of connection element in cab

MODEL

909

1

Expose spot welds in area (A) and cut out with  spot weld milling cutter.

2

Expose spot welds in area (B) and cut out with  spot weld milling cutter.

3

Mark separation line (3).

 Dimensions:
a = 20 mm (measured from edge (arrow))

4

Expose weld spots in area (C) and cut out with  spot weld milling cutter.

5

Expose spot welds in area (D) and cut out with  spot weld milling cutter and remove section.