Remove/install rear pop-out window lock on hardtop

AR60.30-S-0036P

Remove/install rear pop-out window lock on hardtop

10.10.2019

Model

470

with code Y1D (Hardtop)

with code Y1E (Hardtop with roof railing)

1

Mounting clip

2

Cover

3

Handle

4

Nuts

Shown on left side of vehicle

6

Electrical connector

7

Lock

8

Control cable guide

9

Catch hook

10

Cable

11

Bolts

 Warning

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A

 

Remove/install

1

Open rear pop-out window.

2

Remove handle (3).

 To do so, remove nuts (4).

 Removal: Mark installation position of handle (3).

 Installation: Observe marking of the installation position of the handle (3).

 Nut, handle to rear pop-out window to hardtop

*BA60.30-N-1068-01P

3

Remove cover (2).

 To do so, remove retaining clips (1).

4

Disconnect electrical connection (6).

5

Unclip respective cable guide (8) from the respective catch hook (9).

6

Unhook respective cable (10).

7

Remove respective lock (7).

 To do this, remove screw/bolts (11).

 Screw, lock on rear pop-out window to hardtop

*BA60.30-N-1074-01P

8

Install in the reverse order.



Check

9

Check function of the lock (7).

 Platform

Number

Designation

Model 470, 471

BA60.30-N-1068-01P

Nut, handle to rear pop-out window to hardtop

Nm

9

 Platform

Number

Designation

Model 470, 471

BA60.30-N-1074-01P

Screw, lock on rear pop-out window to hardtop

Nm

5