ar6030s0014p

Remove/install check strap for dropside

Typ ar · temat 60.30 · wersja 0101 · 2017-09-19

Dotyczy: Model 470, 471

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 60 Nadwozie kompletne › 60.30 Skrzynia ładunkowa — Seria 470 · Seria 471

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.76 Skrzynia ładunkowa/wywrotka › 35.76.40 Skrzynia ładunkowa — Seria 470 · Seria 471

AR60.30-S-0014P

Remove/install check strap for dropside

18.09.2017

Model

470, 471

Remove/install check strap for dropside

S60.30-0050-09

1

Check strap

3

Screw

5

Fuse

2

Fuse

4

Check strap

6

Screw

Warning

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A

Remove/install

1

Remove respective check strap (1, 4) from platform


Secure dropside against folding down.
This can otherwise lead to damage to the dropside and rear bumper.

For this purpose, lift respective retainer (2, 5) and extend corresponding check strap (1, 4) in the direction of the arrow.

2

Remove respective check strap (1, 4) from dropside

Unscrew corresponding screw (3, 6).

Screw, lock to dropside

*BA60.30-N-1005-01P

3

Install in the reverse order

Platform

Number

Designation

Model 470, 471

BA60.30-N-1005-01P

Screw, lock to dropside

Nm

13

Powiązane dokumenty