ar6000d175007ts

Replace insulation on left side wall paneling

Typ ar · temat 60.00 · wersja 0100 · 2018-08-03

Dotyczy: Model 907, 910

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 60 Nadwozie kompletne › 60.00 Informacje ogólne — Seria 907 · Seria 910

EinPAS 37 Wyposażenie wnętrza › 37.45 Okładzina › 37.45.50 Wygłuszenie/ ekranowanie/ mata tłumiąca — Seria 907 · Seria 910

AR60.00-D-1750-07TS

Replace insulation on left side wall paneling

Model

907, 910

Repair materials

Number

Designation

Order number

BR00.45-Z-1025-04A

Cleaner

A 005 989 19 71

Additional information can be found in the superordinate service document.

The safety information in the superordinate service document must be observed.

Replace insulation on left side wall paneling

D60.00-1156-09

Shown on model 907.735 with code T19 (Sliding door, left), left side of vehicle

a

Dimension (250 mm)

b

Dimension(100 mm)

Replace insulation on left side wall paneling

D60.00-1151-09

Shown on model 907.735 without code T19 (Sliding door, left), left side of vehicle

a

Dimension (250 mm)

b

Dimension(100 mm)

c

Dimension (200 mm)

Observe manufacturer's specification for processing of dampings (1, 2, 3, 4, 5, 6, 7, 8, 9).

1

Remove damaged dampings (1, 2, 3, 4, 5, 6) at sidewall paneling using suitable tool.

2

Model 907, 910
except code T19 (Sliding door left)
Remove damaged dampings (7, 8, 9) at front sidewall paneling using suitable tool.

3

Clean sidewall paneling in area of bonding surfaces for dampings (1, 2, 3, 4, 5, 6) using cleaner.

Bonding surfaces must be fully free from dust and grease.
Otherwise, a sufficient degree of adhesion cannot be assured.

4

Model 907, 910
except code T19 (Sliding door left)
Clean front sidewall paneling in area of bonding surfaces for dampings (7, 8, 9) using cleaner.

Bonding surfaces must be fully free from dust and grease.
Otherwise, a sufficient degree of adhesion cannot be assured.

5

Cut new dampings (1, 2, 3, 4, 5, 6) to size for respectively indicated dimensions (a, b).

6

Model 907, 910
except code T19 (Sliding door left)
Cut new dampings (7, 8, 9) to size for respectively indicated dimension (c).

7

Attach dampings (1, 2, 3, 4, 5, 6) to respective sidewall paneling as shown.

8

Model 907, 910
except code T19 (Sliding door left)
Attach dampings (7, 8, 9) to front sidewall paneling as shown.