ar6000d175006ts

Replace insulation on right side wall paneling

Typ ar · temat 60.00 · wersja 0100 · 2018-08-02

Dotyczy: Model 907, 910

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 60 Nadwozie kompletne › 60.00 Informacje ogólne — Seria 907 · Seria 910

EinPAS 37 Wyposażenie wnętrza › 37.45 Okładzina › 37.45.50 Wygłuszenie/ ekranowanie/ mata tłumiąca — Seria 907 · Seria 910

AR60.00-D-1750-06TS

Replace insulation on right side wall paneling

Model

907, 910

Repair materials

Number

Designation

Order number

BR00.45-Z-1025-04A

Cleaner

A 005 989 19 71

Additional information can be found in the superordinate service document.

The safety information in the superordinate service document must be observed.

Replace insulation on right side wall paneling

D60.00-1157-09

Shown on model 907.735 without code T16 (Sliding door, right), right side of vehicle

a

Dimension (250 mm)

b

Dimension(100 mm)

c

Dimension (200 mm)

Replace insulation on right side wall paneling

D60.00-1152-09

Shown on model 907.735 with code T16 (Sliding door, right), right side of vehicle

a

Dimension (250 mm)

b

Dimension(100 mm)

Observe manufacturer's specification for processing of dampings (1, 2, 3, 4, 5, 6, 7, 8, 9).

1

Remove damaged dampings (1, 2, 3, 4, 5, 6) at sidewall paneling using suitable tool.

2

Model 907, 910
except code T16 (Sliding door right)
Remove damaged dampings (7, 8, 9) at front sidewall paneling using suitable tool.

3

Clean sidewall paneling in area of bonding surfaces for dampings (1, 2, 3, 4, 5, 6) using cleaner.

Bonding surfaces must be fully free from dust and grease.
Otherwise, a sufficient degree of adhesion cannot be assured.

4

Model 907, 910
except code T16 (Sliding door right)
Clean front sidewall paneling in area of bonding surfaces for dampings (7, 8, 9) using cleaner.

Bonding surfaces must be fully free from dust and grease.
Otherwise, a sufficient degree of adhesion cannot be assured.

5

Cut new dampings (1, 2, 3, 4, 5, 6) to size for respectively indicated dimensions (a, b).

6

Model 907, 910
except code T16 (Sliding door right)
Cut new dampings (7, 8, 9) to size for respectively indicated dimension (c).

7

Attach dampings (1, 2, 3, 4, 5, 6) to respective sidewall paneling as shown.

8

Model 907, 910
except code T16 (Sliding door right)
Attach dampings (7, 8, 9) to front sidewall paneling as shown.