ar6000d175002ts

Replace insulation on sliding door

Typ ar · temat 60.00 · wersja 0100 · 2018-07-31

Dotyczy: Model 907.6/7, 910.6 with code T16 (Sliding door right) Model 907.6/7, 910.6 with code T19 (Sliding door left)

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 60 Nadwozie kompletne › 60.00 Informacje ogólne — Seria 907 (modele 6**, 7**) · Seria 910 (modele 6**)

EinPAS 37 Wyposażenie wnętrza › 37.45 Okładzina › 37.45.50 Wygłuszenie/ ekranowanie/ mata tłumiąca — Seria 907 (modele 6**, 7**) · Seria 910 (modele 6**)

AR60.00-D-1750-02TS

Replace insulation on sliding door

Model

907.6/7, 910.6

with code T16 (Sliding door right)

Model

907.6/7, 910.6

with code T19 (Sliding door left)

Repair materials

Number

Designation

Order number

BR00.45-Z-1025-04A

Cleaner

A 005 989 19 71

Refer to the superordinate service document for further information.
The safety information in the superordinate service document must be observed.

Replace insulation on sliding door

D60.00-1146-09

a

Dimension (200 mm)

f

Dimension (390 mm)

b

Dimension (150 mm)

g

Dimension(100 mm)

c

Dimension (240 mm)

h

Dimension (20 mm)

d

Dimension (120 mm)

i

Dimension (340 mm)

e

Dimension (290 mm)

j

Dimension (180 mm)

Observe manufacturer's specifications when processing soundproofing (1, 2, 3, 4, 5).

1.1

Model 907.##1, 910.6##1
Remove damaged dampings (1, 2) at respective sliding door using suitable tool.

1.2

Model 907.##3/##5/##7, 910.##3
Remove damaged dampings (3, 4, 5) at respective sliding door using suitable tool.

2.1

Model 907.##1, 910.6##1
Clean sliding door in area of bonding surfaces for dampings (1, 2) using the cleaner.

Bonding surfaces must be fully free from dust and grease.
Otherwise, a sufficient degree of adhesion cannot be assured.

2.2

Model 907.##3/##5/##7, 910.##3
Clean sliding door in area of bonding surfaces for dampings (3, 4, 5) using the cleaner.

Bonding surfaces must be fully free from dust and grease.
Otherwise, a sufficient degree of adhesion cannot be assured.

3.1

Model 907.##1, 910.6##1
Cut new dampings (1, 2) to size for respectively indicated dimensions (a, b).

See Fig. A.

3.2

Model 907.##3/##5/##7, 910.##3
Cut new dampings (3, 4, 5) to size for respectively indicated dimensions (c, g, e, f, g, h, i, j).

See Fig. B.

4.1

Model 907.##1, 910.6##1
Attach dampings (1, 2) at relevant sliding door as shown.

See Fig. A.

4.2

Model 907.##3/##5/##7, 910.##3
Attach dampings (3, 4, 5) at relevant sliding door as shown.

See Fig. B.