ar6000d080002ts

Pound in vehicle identification number

Typ ar · temat 60.00 · wersja 0100 · 2017-11-28

Dotyczy: Model 907, 910

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 60 Nadwozie kompletne › 60.00 Informacje ogólne — Seria 907 · Seria 910

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.20 Kabina kierowcy/ karoseria › 35.20.30 Kabina kierowcy — Seria 907 · Seria 910

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.20 Kabina kierowcy/ karoseria › 35.20.40 Karoseria surowa — Seria 907 · Seria 910

AR60.00-D-0800-02TS

Pound in vehicle identification number

Model

907, 910

Pound in vehicle identification number
Pound in vehicle identification number
Pound in vehicle identification number
Pound in vehicle identification number

906 589 10 63 00

Stamping guide

000 589 03 39 00

Letter marking punch

000 589 02 39 00

Star marking punch

000 589 01 39 00

Die stamp numbers

Pound in vehicle identification number

000 589 00 39 00

Letter marking punch

Stamp vehicle identification number in standard field.

Pound in vehicle identification number

Use star stamp at the start and end of the vehicle identification number (FIN).

1

Start stamping process with star stamp at far left.


Ensure correct alignment of star stamp.
The tip of the star stamp must point upward in the stamp field.



2

Stamp in world manufacturer code with   letter stamp and number stamp at left edge of 1st graduation line of window plate of stamping guide.



3

Stamp in remaining VIN.


For this purpose, move subsequent characters with letter stamp and number stamp forward on scale by one graduation line. Finally, stamp in a star with star stamp.
The entire width of the VIN is 106 mm (4 mm).


D60.00-1113-11