ar5471p0100rg

Remove/install sensors for Blind Spot Assist

Typ ar · temat 54.71 · wersja 0101 · 2017-04-20

Dotyczy: Model 190 with code 234 (Blind Spot Monitoring)

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 2 Podwozie › 54 Instalacja elektryczna, wyposażenie i wskaźniki › 54.71 Systemy asystujące wykorzystujące kamerę i radar — Seria 190

EinPAS 26 Aktywne systemy bezpieczeństwa › 26.27 Asystent martwego punktu › 26.27.12 Czujnik/ przełącznik/ wiązka przewodów — Seria 190

AR54.71-P-0100RG

Remove/install sensors for Blind Spot Assist

11.04.2017

Model

190

with code 234 (Blind Spot Monitoring)

Remove/install sensors for Blind Spot Assist

Shown on vehicle with code M031 (GT C version)

B92/6

Right outer rear bumper integrated radar sensor

B92/11

Left outer rear bumper integrated radar sensor

P30.30-2606-04

Remove/install sensors for Blind Spot Assist

Shown on vehicle without code M031 (GT C version)

1

Bumper

3

Electrical connector

B92/6

Right outer rear bumper integrated radar sensor

B92/11

Left outer rear bumper integrated radar sensor

P54.71-2695-06

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Topical note

Notes on preventing damage to electronic components due to a magnetic tool

AH54.00-P-0002-01A

Remove/install

1

Remove bumper (1) at rear and put down on soft, clean base

AR88.20-P-2200RG

2

Release and disconnect electrical connection (3)

3

Unscrew bolt of cover above the integrated rear outer right bumper radar sensor (B92/6) or the integrated rear outer left bumper radar sensor (B92/11) and remove cover

Model 190
with code 234 (Blind Spot Monitoring)
with code M030 (GT R version)
Model 190
with code 234 (Blind Spot Monitoring)
with code M031 (GT C version)

4

Release integrated rear outer right bumper radar sensor (B92/6) or the integrated rear outer left bumper radar sensor (B92/11) from the bracket and remove

Mounting wedge

*110589035900

5

Install in the reverse order

Remove/install sensors for Blind Spot Assist

110 589 03 59 00

Mounting wedge

Powiązane dokumenty