ar5465s000101e

Remove/install sensors for Parktronic system (PTS) on the outside of the front bumper

Typ ar · temat 54.65 · wersja 0102 · 2015-12-02

Dotyczy: Model 447, 448 with code EZ7 (Active Parking Assist)

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 2 Podwozie › 54 Instalacja elektryczna, wyposażenie i wskaźniki › 54.65 Wspomaganie parkowania — Seria 447 · Seria 448

EinPAS 28 System komfortowy/ wspomagający kierowcę › 28.15 Asystent parkowania › 28.15.12 Czujnik/ przełącznik/ wiązka przewodów — Seria 447 · Seria 448

AR54.65-S-0001-01E

Remove/install sensors for Parktronic system (PTS) on the outside of the front bumper

Model

447, 448

with code EZ7 (Active Parking Assist)

Remove/install sensors for Parktronic system (PTS) on the outside of the front bumper
Remove/install sensors for Parktronic system (PTS) on the outside of the front bumper

Work procedure shown on left side of vehicle

1

Remove retaining clips (1) from left or right fender liner (2).


Installation: Check the retaining clips (1) for damage.


If damage is present

Replace respective retaining clip (1).


S54.65-4574-01

S54.65-4575-01

Remove/install sensors for Parktronic system (PTS) on the outside of the front bumper

2

Push fender liner to one side until outer left front PARKTRONIC sensor (B8/18) or outer right front PARKTRONIC sensor (B8/21) is accessible.



3

Disconnect electrical connection at PARKTRONIC sensor, outer left front (B8/18) or PARKTRONIC sensor, inner right front (B8/21).



4

Carefully pull catch hooks (arrows) outwards and pull PARKTRONIC sensor, outer left front (B8/18) or PARKTRONIC sensor, outer right front (B8/21) out of the guide.


Installation: Check the decoupling ring (3) for damage.
Convert decoupling ring (3) when replacing left front outer PARKTRONIC sensor (B8/18) or right front outer PARKTRONIC sensor (B8/21).


If decoupling ring (3) is damaged

Replace decoupling ring (3).



5

Install in the reverse order.


S54.65-4576-06