ar5465p0018eq

Remove/install parking system control unit

Typ ar · temat 54.65 · wersja 0100 · 2019-04-24

Dotyczy: Model 293 with code 235 (Active Parking Assist with PARKTRONIC)

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 2 Podwozie › 54 Instalacja elektryczna, wyposażenie i wskaźniki › 54.65 Wspomaganie parkowania — Seria 293

EinPAS 28 System komfortowy/ wspomagający kierowcę › 28.15 Asystent parkowania › 28.15.11 Moduł sterujący/ przekaźnik — Seria 293

AR54.65-P-0018EQ

Remove/install parking system control unit

22.03.2019

Model

293

with code 235 (Active Parking Assist with PARKTRONIC)

Remove/install parking system control unit

P54.65-A044-08

1

Bolts

3

Nut

2

Bracket

N62

Parking system control unit

Warning

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Notes on safety-relevant components

AH00.00-Z-0019-01A

Notes on HANDS-FREE ACCESS

AH80.61-P-0001-01A

Remove/install

1

Commission parking system control unit (N62).

When replacing parking system control unit (N62).

AD00.00-P-2000-06FR

2

Switch off ignition and store transmitter key outside of transmission range (min. 2  m).

3

Remove left load compartment trim.

AR68.30-P-1180LWG

4

Remove screws (1) and remove bracket (2) with connected control units.

5

Detach nut (3) and remove parking system control unit (N62).

6

Disconnect electrical connectors from parking system control unit (N62).

The number of electrical connectors can vary depending on the equipment variant.

7

Install in the reverse order.

Powiązane dokumenty